Skip to content
No. 004On holdRadiation oncologyUpdated Nov 15, 2026

Open planning tools for FLASH treatment

Good it would do
2 / 5
Can AI help
3 / 5
How neglected
2 / 5
Can we check it
2 / 5

Why it's on hold

Parked: open FLASH planning tools exist but are single-centre research tools, and validating dose-rate calculations across machines needs vendor-held delivery timing logs and measurements the lab cannot get, so Checkable is 2. A narrow timing-sensitivity benchmark on public CT is feasible but of unproven use; the outside skeptic doubts it is worth doing even with logs.

Why it's stuck

Accurate planning for FLASH has mostly lived inside proprietary vendor systems. The benefit is only about 10 to 20 percent, so small dose errors can erase it, yet open tools are few.

What we'd try

Fund and run open, validated dose simulation across many machine setups so smaller centers and trials can plan accurately.

We'd look again if

All three: (1) a FLASH centre or vendor agrees to share anonymised spot-level timestamped delivery logs with matching measurements for at least one machine, or a public multi-machine FLASH delivery or measured dose-rate dataset is released; (2) OpenTPS or matRad maintainers confirm a timing-sensitivity or cross-machine benchmark is missing and would be used; (3) a named research user states which planning or trial-design decision it would change.

Source: https://www.redjournal.org/article/S0360-3016(24)02803-7/fulltext

Think we got it wrong?

Ruled-out problems can come back. Tell us what we missed.

Members can read the full record for this problem, check its sources and comment. Open the member view →